Results: Browse all data

The objective of the Consumers, Vehicles and Energy Integration project is to inform UK Government and European policy and to help shape energy and automotive industry products, propositions and investment strategies. Additionally, it aims to develop an integrated set of analytical tools that models future market scenarios in order to test the impact of future policy, industry and societal choices. The project is made up of two stages:

• Stage 1 aims to characterize market and policy frameworks, business propositions, and the integrated vehicle and energy infrastructure system and technologies best suited to enabling a cost-effective UK energy system for low-carbon vehicles, using the amalgamated analytical toolset.
• Stage 2 aims to fill knowledge gaps and validate assumptions from Stage 1 through scientifically robust research, including real world trials with privatevehicle consumers and case studies with business fleets. A mainstream consumer uptake trial will be carried out to measure attitudes to PiVs after direct experience of them, and consumer charging trials will measure mainstream consumer PiV charging behaviours and responses to managed harging options

This spreadsheet is part of Deliverable D3.2, Battery State of Health Model, and accompanies the report on the development and validation of an algorithm that quantifies battery ageing based on input parameters that can be either inferred from Electric Vehicle (EV) usage or measured on-board. It contains the Battery State of Health Model, which provides a relatively high-level overview of battery degradation and state of health, which will be further developed during Stage 2 of the project

The objective of the Consumers, Vehicles and Energy Integration project is to inform UK Government and European policy and to help shape energy and automotive industry products, propositions and investment strategies. Additionally, it aims to develop an integrated set of analytical tools that models future market scenarios in order to test the impact of future policy, industry and societal choices. The project is made up of two stages:

• Stage 1 aims to characterize market and policy frameworks, business propositions, and the integrated vehicle and energy infrastructure system and technologies best suited to enabling a cost-effective UK energy system for low-carbon vehicles, using the amalgamated analytical toolset.
•  Stage 2 aims to fill knowledge gaps and validate assumptions from Stage 1 through scientifically robust research, including real world trials with privatevehicle consumers and case studies with business fleets. A mainstream consumer uptake trial will be carried out to measure attitudes to PiVs after direct experience of them, and consumer charging trials will measure mainstream consumer PiV charging behaviours and responses to managed harging options

This spreadsheet accomanies the report that represents Deliverable D3.1, Battery Cost and Performance and Battery Management System Capability Report and Battery Database. The purpose of this report is capture the approach proposed to develop cost and performance projections for automotive batteries to 2050.

This spreadsheet contains the Battery Cost and Performance Database.

The DOE Global Energy Storage Database provides free, up-to-date information on grid-connected energy storage projects around the world and relevant state and federal policies. There is a searchable database on projects and policies, with drill-down capability. In the Projects section, it is possible to drill-down to individual plants, detailing technology (e.g. Vanadium Redox Flow Battery), power, duration and status. This data can be downloaded and used freely subject to conditions of use. Data visualization is also available.

The mission of the US Department of Energy Hydrogen and Fuel Cells Program is to reduce petroleum use, greenhouse gas emissions, and air pollution and to contribute to a more diverse and efficient energy infrastructure by enabling the widespread commercialization of hydrogen and fuel cell technologies. The Program Records area contains supporting data for DOE publications, described as Program-related, Analysis, Fuel cells, Production/delivery, Safety codes, and standards and Storage The U.S. DOE Hydrogen and Fuel Cells Program works in partnership with industry, academia, national laboratories, federal and international agencies to:

• Overcome technical barriers through research and development of hydrogen production, delivery, and storage technologies, as well as fuel cell technologies for transportation, distributed stationary power, and portable power applications
• Address safety concerns and develop model codes and standards
• Validate and demonstrate hydrogen and fuel cell technologies in real-world conditions
• Educate key stakeholders whose acceptance of these technologies will determine their success in the marketplace.

The publications supported by these records can also be found on the website.

The database of European energy storage technologies and facilities includes: energy storage technologies and their characteristics; front of the meter energy storage facilities in the EU-28, operational or in project, that are connected to the generation and the transmission grid; behind the meter energy storage installed capacity per country. Database and report available.

The data is from tests performed at The University of Sheffield, on a 1MWh/2MW lithium-titanate battery energy storage (BESS) by Toshiba SCiB Technology, within the EPSRC funded Multi-scale ANalysis for Facilities for Energy STorage (Manifest) Project EP/N032888/1. The system is connected directly to the grid through an 11kV feed, located at Willenhall Primary Substation. Interfacing to grid is achieved through a 2.2MVA ABB PCS100 inverter, and a 2.1MVA dry-type transformer with 1:30.55 ratio. The main parameters are related to time-series of grid voltage and frequency, AC and DC voltages and currents, operating conditions (such as for example room temperature), etc.

The experimental background is explained in Experiment_Description_Readme.pdf

The data are time-stamped in the format MM/DD/YYYY HH:MM:SS UTC, while the parameters are given using the International System of Units.
This catalogue entry was updated on 2021-02-03 to link directly to the data from the calibration test carried out on 2017-03-01. Previously it linked to the top level of the Sheffield BESS test data at https://data.ukedc.rl.ac.uk/browse/edc/power/storage/MANIFEST/Sheffield. The title was updated to include the words "Calibration Test" to differentiate it from other tests carried out with the Sheffield BESS facility. The previous title was "EPSRC ManIfest Battery Energy Storage System (BESS) The University of Sheffield". No changes have been made to the dataset and no other changes have been made to this catalogue record.

The data was collected during instantaneous power loss and efficiency tests performed at The University of Manchester in 2018 and 2020 , on a 240kVA and 180kWh Siemens SieStorage lithium-ion battery energy storage system (BESS). The system is connected behind the meter to the low-voltage distribution network via a 260kVA, 400/433V TMC isolation transformer. This data was collected as part of an experiment within the MANIFEST project.
The EPSRC-funded Multi-scale ANalysis for Facilities for Energy Storage (MANIFEST) Project (EP/N032888/1) aimed to study and investigate the capabilities of energy storage facilities installed in UK Universities.
There are 47 data files in this dataset.

The data is from efficiency tests performed at The University of Sheffield, on a 1MWh/2MW lithium-titanate battery energy storage (BESS) by Toshiba SCiB Technology, within the EPSRC funded Multi-scale ANalysis for Facilities for Energy STorage (Manifest) Project EP/N032888/1. The system is connected directly to the grid through an 11kV feed, located at Willenhall Primary Substation. Interfacing to grid is achieved through a 2.2MVA ABB PCS100 inverter, and a 2.1MVA dry-type transformer with 1:30.55 ratio. This data was collected as part of an experiment within the MANIFEST project to study the efficiency of the Willenhall Energy Storage System, managed by The University of Sheffield.The EPSRC funded Multi-scale ANalysis for Facilities for Energy STorage (Manifest) Project (EP/N032888/1) aimed to study and investigate the capabilities of energy storage systems installed in UK Universities.The data presented here has contributed to the following publications:'Experimental Analysis of Efficiencies of a Large Scale Energy Storage System', S. Mori, M. J. Smith, D. T. Gladwin & D. A. Stone, 'Practical state estimation using Kalman filter methods for large-scale battery systems', Z. Wang, D. T. Gladwin, M. J. Smith, S. Haass (Under review)

The data is from tests performed at The University of Manchester on a commercial 240 kW 180 kWh lithium-ion battery electrical energy storage system (BESS) within the EPSRC funded Multi-scale ANalysis for Facilities for Energy STorage (Manifest) Project (EP/N032888/1). The system is connected to the LV network (400 V) and is located on campus within a mixed-use (offices, lecture theatres, and laboratories) university building (so behind the meter). The tests carried out in March 2017 are described in the PDF Experiment_Description_Readme.pdf

The experiments were conducted using an Energy Storage System (ESS) in the Smart Grid laboratory at Newcastle University that includes transformers and converters interfacing to the grid, and various energy storage assets. The aim was to demonstrate the control of power flows between the grid and a 90kW / 2kWh supercapacitor bank. Tests were performed to control real power steps (short duration / high power, and long duration / low power) and reactive power steps of the grid-coupled converter. The corresponding power time-series at the supercapacitor bank terminals and the State of Charge (SoC) were recorded and plotted in the accompanying report.

The data were collected as part of an experiment within the MANIFEST project to demonstrate control operations of an ESS using the Smart Grid Laboratory at Newcastle University, UK.

The EPSRC funded Multi-scale ANalysis for Facilities for Energy STorage (Manifest) Project (EP/N032888/1) aimed to study and investigate the capabilities of energy storage systems installed in UK Universities.

In this experiment the efficiency of an emulated Energy Storage System (ESS) is measured in the Smart Grid laboratory at Newcastle University. Real-time simulation is carried out using a TRIPHASE real-time simulator to model the ESS network, allowing the laboratory hardware to operate as though it is coupled to a real distribution-scale network. The ESS emulator was used to represent the characteristics of three Li-ion battery banks with nominal voltage, power and energy ratings as follows: (i) 200V 1kW 1kWh, (ii) 400V 5kW 5kWh, and (iii) 400V 10kW 10kWh.

The data were collected as part of an experiment within the MANIFEST project to study the efficiency of an emulated supercapacitor using the Smart Grid Laboratory at Newcastle University, UK.

The EPSRC funded Multi-scale ANalysis for Facilities for Energy STorage (Manifest) Project (EP/N032888/1) aimed to study and investigate the capabilities of energy storage systems installed in UK Universities.

In this experiment the response time of an Energy Storage System (ESS) was measured in the Smart Grid laboratory at Newcastle University. Real-time simulation was carried out using a TRIPHASE real-time simulator to model the ESS network, allowing the laboratory hardware to operate as though it is coupled to a real distribution-scale network. The ESS emulator was used to represent the characteristics of a Li-Ion battery with a single string of 50 series cells, each with a nominal voltage of 4 V and a capacity of 200 Ah; these parameters were selected in order to set the nominal voltage, power and energy ratings of the ESS to 200 V, 20 kW and 40 kWh respectively.

The data were collected as part of an experiment within the MANIFEST project to study the response time of an ESS using the Smart Grid Laboratory at Newcastle University, UK.

The EPSRC funded Multi-scale ANalysis for Facilities for Energy STorage (Manifest) Project (EP/N032888/1) aimed to study and investigate the capabilities of energy storage systems installed in UK Universities.

The experiments were conducted using an Energy Storage System (ESS) in the Smart Grid laboratory at Newcastle University, that includes transformers and converters interfacing to the grid, and various energy storage assets. They tested the efficiency of the system components, including the supercapacitor bank and associated power converters. Tests were performed to control the supercapacitor power steps, while measuring power at the terminals of each system component. Efficiencies of the system components for various initial values of supercapacitor state of charge (SoC) are presented in the data files and accompanying report.

The data were collected as part of an experiment within the MANIFEST project to demonstrate the efficiency of the supercapacitor energy storage system and associated power converters in the Smart Grid Laboratory at Newcastle University, UK.

The EPSRC funded Multi-scale ANalysis for Facilities for Energy STorage (Manifest) Project (EP/N032888/1) aimed to study and investigate the capabilities of energy storage systems installed in UK Universities.

Cost and performance metrics for individual energy storage technologies which track: cost to procure, install, and connect an energy storage system; associated operational and maintenance costs; and end-of life costs. Technologies are: lithium-ion (lithium iron phosphate and nickel manganese cobalt chemistries); vanadium redox flow; lead acid; pumped storage hydropower; compressed air energy storage; and hydrogen. 2020 data and 2030 estimates of costs and performance are available.

European electricity harmonisation and electrotechnical standards, based on a consensus, which reflects the economic and social interests of 33 CENELEC Member countries channelled through their National Electrotechnical Committees (NCs). Most standards are initiated by industry. Other standardization projects can come from consumers, Small and Medium-sized Enterprises (SMEs) or associations, or even European legislators. Besides European Standards, CENELEC produces other reference documents, which can be developed quickly and easily: Technical Specifications, Technical Reports and Workshop Agreements. CENELEC is a Non Profit International Association, forming the officially recognised European Standards Organisations (ESOs) together with CEN, the European Committee for Standardization and ETSI, the European Telecommunications Standards Institute. CENELEC acts as a platform for experts to develop European Standards (ENs), which facilitate world trade by removing barriers to trade, enhancing economic growth and leading to new markets.CENELEC concentrates most of its work on 2 major deliverables: The European Standard (EN) and the Harmonization Document (HD). These two documents are referred to commonly as "standards" and must be implemented in all CENELEC member countries, who must also withdraw any conflicting standard.

The Electricity Pool operated from 1st April 1990 to 26th March 2001, controlling the trading of electricity within England and Wales. The Electricity Pool data contains system demand and transmission losses plus the price information (/MWh) within the trading pool, comprising the three main prices: Pool purchase price (PPP), the basis of payments to generators; Pool selling price (PSP), the basis of payments by suppliers; and system marginal price (SMP), the highest offered price for any generating set scheduled by the Pool to run before system constraints are taken into account. The Electricity Pool system was replaced by the New Electricity Trading Arrangements (NETA/BETTA) from 27 March 2001. (Note : It is mandatory to acknowledge the UKERC EDC and the data owner Poolit Ltd when any use of this data is made in publications) Explanation of parameters and pool operation
PSP : Pool Selling Price, is the price paid mostly by RECs purchasing electricity from the Pool to sell to their final commercial, industrial and residential customers; this value is determined for two distinct price-rule regimes referred to as Table A and Table B periods, such that: PSP = SMP + CC + UPLIFT = PPP + UPLIFT
SMP : System Marginal Price is the highest offered price for any generating set scheduled by the Pool before system constraints are taken into account
LOLP : Loss Of Load Probability, a decreasing function of the expected amount of excess capacity available during each half-hour period, determined for each half-hour as the probability of a supply interruption due to generation capacity being insufficient to meet demand (the greater the amount of capacity available relative to expected demand in any half-hour, the lower the LOLP and therefore the lower the capacity charge per KWH paid to generators)
VOLL : Value Of Lost Load, representing the per kWh willingness of customers to pay to avoid supply interruptions; it was set by the Director General of the Office of Electricity Regulation (OFFER) at 2,000 per megawatt-hour (MWH) for 1990/91 and was then increased annually by the growth in the RPI
PPP : Pool Purchase Price, is the price paid to generators for electricity purchased into the Pool
CC : Capacity Charge: CC = LOLP * (VOLL - SMP) is a signal to generators of the necessity for additional generation capacity and to consumers that their consumption has a significant probability of requiring the maximum amount of generating capacity available in that load period
UPLIFT : a charge to compensate generators for reserve, plant available but not actually used to meet demand, and startup costs, known only ex post and therefore the only price uncertainty from the day ahead perspective; it is collected over at least 28 Table A pricing periods each day (UPLIFT is zero for Table B pricing periods) according to the formula: Availability Payment/MWh = LOLP*(VOLL - max(SMP, bid price))

UKESTO showcases national energy storage innovation, describing energy storage facilities in the UK and providing data from test beds.

In 2012 the Engineering and Physical Sciences Research Council (EPSRC) funded the Energy Storage Capital Grants call, where fifteen institutions received 30m pounds of funding across five consortia for the development and testing of energy storage technologies that span application areas. The consortia leads were the University of Birmingham, Imperial College, Loughborough University, the University of Manchester, and the University of Sheffield.

In 2016 these institutions secured a 4m pound investment from EPSRC to deliver the Multi-scale Analysis for Facilities for Energy Storage (MANIFEST) project, where the UK Energy Storage Observatory is a major deliverable.

Annual, quarterly and monthly electricity statistics available to download. This page brings together all the UK Government data sources that focus on electricity including historic data (1920-2012) and imports, exports and transfers of electricity Brings together electricity data from DUKES (annual data), energy trends (articles, quarterly and monthly data) and historic data. These datasets form part of other dataset collections in the UK Government statistics.

Data collected at the UKGEOS (UK Geoenergy Observatories) facilities including drilling data packs, ongoing monitoring data and experiment results. The data from UKGEOS will apply to geothermal energy, hydrogen, carbon capture and storage, and storage solutions for wind, solar and tidal energy can reduce our carbon emissions.